• Fusion Transfer Gel
  • Fusion Transfer Gel
1 1

Fusion

Fusion Transfer Gel

Fusion Transfer Gel

$9.99 CAD
$9.99 CAD $9.99 CAD
En vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Size
Add to wishlist Remove from wishlist
This dual-use product is working over time! It can be used to transfer images onto your surfaces, or it can be used as a decoupage adhesive. Either way it is used, the results are simply stunning and very easy to achieve with our unique formula. Create beautiful decoupage or transfer images onto virtually any surface decoupage onto glass, metal, wood- you name it!

Directions:
To transfer an image simply apply the Decoupage & Transfer Gel to the surface and place your print face down. Apply pressure with a putty knife or credit card to ensure contact and remove any bubbles. After 24hrs or so, you can wet the back and start rubbing away the paper pulp. Next, add wax or another layer of the Decoupage and Transfer Gel for protection.

To decoupage, apply it to the surface and or the back of the image or tissue/decoupage paper and stick it in place. You can place cling wrap over the image to smooth out any wrinkles or bubbles. When dry you can add another coat of the Decoupage and Transfer Gel to seal or you can use any of the other Fusion finishes.

Good to note:
Decoupage and Transfer gel is white but dries to a clear matte film.
For Decoupage 1 hr for dry time and 21 days for cure time.
Approx 35 sq ft of coverage.

Application Tool  Brush
Re-coat Time  2-6 hrs or when dry
Top Coat  Not required - however any topcoat can be applied if desired.
Clean Up  Water
Coverage  35 sq.ft.
Finish/Sheen  Matte
Recommended Uses  Decoupage textiles onto a surface; transfer a printed  image onto a surface
Can Be Applied To  Fabric, Metal, Painted surfaces. Non-oil, no-wax surfaces.
Can Be Painted Over  Yes
How to Prep  Apply to a clean, wax or oil-free surface
Cure Time  21 Days
Maintenance/ Cleaning  Clean as required, with mild soap and water.

Image Transfer:
Be sure to use a laser printer, ink jet will not work well. Be sure to print your image backwards. To transfer an image simply apply the Decoupage and Transfer Gel to the surface and place your print face down. Apply pressure with a putty knife or credit card to ensure contact and remove any bubbles. After 24hrs or so you can wet the back and start rubbing away the paper pulp. 

You can add wax or another layer of the Decoupage and Transfer gel for protection.

Decoupage:
Using our Decoupage Gel apply it to the surface and or the back of the image or tissue/decoupage paper and stick in place you can place cling wrap over the image to smooth out any wrinkles or bubbles. 

When dry you can add another coat of the Decoupage and Transfer gel to seal and as protection or any of the other Fusion finishes.

DID YOU KNOW?

  • The gel can be used for image transfer and decoupage 
  • You can use it to seal your project too.
  • Can be used on Glass, Metal, Fabric and wooden or painted surfaces.

WHAT WILL IT LOOK LIKE?
Decoupage and Transfer gel is white but dries to a clear matte film. 

CURE TIME 
For Decoupage 2-6hrs for dry time and 21 days for cure time.

For Transfers - you will want to wait a minimum of 12-24 hours before wetting the paper and trying to complete the transfer.

 

WHAT ELSE CAN IT BE USED FOR?
It can be used as a topcoat over your decoupage or  transfer projects. It would be a great topcoat for crafting too. 

As with all Fusions water based products it can be layered! So you can add a glaze or a topcoat no problem!

Afficher tous les détails